Crown molding is the simplest and easiest way of adding ambiance and value to your house. It only takes a few remodeling techniques, and you will have a luxurious home. How do you fix crown molding corners?
There are different steps that you need to follow, and we are going to look at them in this article. The work can take four to eight hours, but it can also take two days. If you are to use a professional, you can pay roughly 100 dollars.
If you are good at handy work, then fixing your crown molding corners should be something simple. It can take you one weekend to complete a medium-sized room. If you are patient and careful, you can get good results after all the hard work.
From the very beginning, crown molding has been an attractive concept to many people. Crown molding can be complete either by hiring an expert or by attempting the repair yourself. It takes time and patience, but it is well worth the effort.
In recent years, homeowners have constantly loved to improve the appearance of their homes. You will find crown molding in all parts of your house. You should ensure that you are following the instructions correctly.
What Is Crown Molding?
Crown molding is the process of creating a cornice between the walls and the ceiling. It is done in interior design and is common in many homes. In most cases, the angle between the vault and the wall is 45 degrees. Depending on your preferences, you may choose to use 38 degrees or 52 degrees.
A crown molding installation is popular because of its low cost and fancy look. It also helps to separate the colors of the walls and the ceiling. Crown molding in modern homes is very simple because it fits the style.
Crown molding can apply in the kitchen, the bedroom, and even the bathroom. It is also possible to do this on cabinets giving them a better look.
What DO You Need Before Fixing Crown Molding?
When it comes to crown molding, you need to think of your safety first. It involves working from above while standing on a ladder. Some sections of molding can sometimes be very high, and you will need an assistant.
If the molding corner is far, ask your partner to help hold the ladder for you. It is a very delicate process, and you need to be patient and careful and the same time. But it is all doable if you know what you are doing.
What Tools Do You Need?
- Crown molding MDF/wood
- Paintable caulk
- Paintbrush
- Wood filler
- Paint primer
- Glossy trim paint
- Stud finder
- Power miter saw
- Nails
- Stepladder
- Carpenters’ pencil
- Tape measure
- Glossy trim paint
Step One: Take Measurements
Your goal is to measure the walls and angles of the room using the tape measure. You can determine how much crown molding you will need by measuring. The best thing to do is to purchase extra crown molding for the extra work.
The best way to measure is to use a long piece of wood that runs from end to end. Your work will be easy if you use this method instead of using separate pieces. If the crown molding is large enough, it can be 8 feet long or 16 feet long.
Step Two: Cut the Pieces
After you have measured all the angles, it is now time to cut the crown molding pieces. You will need to use a power miter saw because it will give you precise cuts. Cut the long piece so that they can meet inside the corners.
Cut the pieces at an angle of 45 degrees on a flat surface. Make sure you do not miss the cut when cutting.
Before you begin, you should prepare all the pieces you will use to fix the crown molding.
Step Three: Prime the Pieces
Once all the cuts and joints are well cut, it is time to prime the wood. It is not necessary to prime the MDF molding again if it already has a primer on it. If you are using bare wood, then you can go ahead and prime it. Let it dry completely before installing.
If you prefer, you can go ahead and paint the pieces with finishing paint before fixing the crown molding. It will make your work easy because you do not have to repaint it. Some people choose to paint the pieces after correcting them.
Make sure that the wall studs are easily visible by marking them with a pencil. When you start the installation, you will need to identify these places. Marks should be visible on the ceiling and the wall.
Step Four: Install Crown Molding
Start by flipping the crown molding and making sure that it is upright. To install the crown molding, you need to start from the center and hold it on one side. If all the angles are precise, they should fit the corner.
Use small nails to drill the molding in position against the wall. Ensure that the joints are together at all corners. If you have some holes left, you can fill them using wood filler. You can use a putty knife to cover the holes.
The walls and the ceiling are not flat, so you need to use caulk to fill all the gaps. Paintable caulk is the best because it is smooth and will penetrate all the spaces.
Step Five: Paint the Molding
Some carpenters paint moldings after they secure them in the right place. If you are not a skilled painter, then you should first paint them before installing them. You can paint two coats if you want to get great results.
If you want to be creative, you do not have to install crown molding on the wall and ceiling. Some people like to be creative when installing. You can move the crown a few meters downwards and leave space for wires and lighting.
