The Best Tile Adhesive for a Wet Room

Last updated:

Our Top Picks: Best Adhesive For Tiling a Wet Room

When it comes down to the job of installing tiles in wet rooms like your bathroom or kitchen, the real MVP is not the glossy, designer tiles, but the unseen hero doing its job quietly behind the scenes—The tile adhesive! 

When tiling floors; those wet corners of your house, choosing the right tile grout and adhesive is crucial. Tiling without the right adhesive and tile grout is like a ship without its anchor. It won’t last long before it starts coming apart. Remember, the devil is in the detail. 

1. Kraken Bond Ultra Grab Construction Adhesive: A Reliable Choice

Let’s dive a bit deeper into the island of Kraken Bond Ultra Grab Construction Adhesive. If there was a hall of fame for easy-to-use tile adhesives, this one would have its own star on the walkway. 

Wouldn’t it be nice if we had an adhesive that fills the gaps between the tile and the substrate but doesn’t cure faster than you blink? Well, the Kraken Bond Ultra Grab is your shooting star in this case. Detailed instructions, easy application, and slow cure, it’s everything you ever wanted in your tile adhesive.

Highlights

The Kraken Bond Ultra adhesive rules the roost when it comes to reliability. Its next-level adhesion strength tames even the wildest tiles and preps your wet room like a safe haven. 

Wait, we haven’t even got to the best part yet. The adhesive is easy enough to use. It’s like the BFF you can always depend on, with a comfortable working time and an ideal cure rate. Long story short, it keeps the excitement of grouting stage intact and doesn’t make you wait forever.

Pros

  • Great adhesion strength for those feisty tiles
  • Perfect balance between strength and flexibility
  • Easy to use 
  • It doesn’t make you wait forever before reaching the grouting stage

Cons

  • A bit on the pricier side; but hey, good things do come with a cost
  • May not work as well with larger stone tiles

For a more detailed review, click Here

2. Loctite oz Tub Clear Silicone Waterproof Sealant: The Professional Choice

You’ll love the Loctite silicone waterproof sealant if you’re after something with heavy-duty capabilities. This ain’t your average adhesive – it does a fantastic job holding up under the most damp conditions. 

It works like that trustworthy workhorse that never lets you down. Sure, you gotta be careful not to use it alongside a waterproofing membrane – the silicone kinda disagrees with it.

But listen here, even with that little hiccup, the Loctite sealant earned its place as the professional’s choice for good reason. It’s tough as old boots. Once it sets, there ain’t no amount of water or moisture that’s gonna make it blink. This adhesive got your tile’s back like the bodyguard you never knew they needed.

Highlights

This sealant makes sure your tiles look good. It goes on clear and does not fog up the joint, which means your tiles get to show off their beautiful selves. And once it’s set, it’s stuck. Ain’t no budging it unless you’ve got a real hankering for some hard work.

It’s also made to resist those wily, unseen critters we know as mold and mildew. You can rest easy knowing it won’t be party central for any kind of funky fungus. 

Pros

  • You can bet your last buck on its durability. 
  • It’s got anti-mold and anti-mildew properties
  • The clear color won’t ruin your tile’s aesthetic. 

Cons

  • It doesn’t play nice with waterproofing membranes.

You can grab this bad boy here

3. Gorilla Max Strength Clear Construction Adhesive: Great Quality Squeeze Tube Adhesive

Now, onto another powerhouse adhesive: The Gorilla Max Strength. This ain’t your average gorilla, it’s an adhesion force to reckon with. Mind you, it’s not one to rush a job. Like a good BBQ, it takes its sweet time, but man, is it worth the wait. You think you know strength? This stuff will show you a whole new definition.

It’s one of those products that’s just right for any wet room tiling job. It fills in those pesky gaps between tiles nice and easy. Plus, it buys you enough time to get the job done without going off faster than popcorn in a hot pan.

Highlights

One more thing that puts the Gorilla Max Strength adhesive atop the pile is its squeezable tube. With this, you’re always in control. You get to command where it goes and how much gets there.

Of course, once it decides to set, it’s on there good. Ain’t no amount of damp gonna move it. With Gorilla strength holding your tiles, you can say bye-bye to any worries about moisture and hello to a well-adorned, worry-free wet room.

Pros

  • Superior waterproofing capabilities
  • Boast excellent adhesion
  • Works well with a variety of tile materials
  • They’re low on VOC!

Cons

  • A bit on the pricey side

Check out more details here

Choosing the Best Tile Adhesive for Wet Rooms 2023 Buyer’s Guide

When choosing the best tile adhesive, remember these golden rules: 

Waterproofing

Trust me when I say this – A solid waterproofing system will ensure your wet room stays leak-free, preventing any damage to your property. Tiling wet locations requires products that won’t let a single drop seep through.

Type of Tile

Tile adhesive and tile type got to get along well. So, before you get drubbing, check the labels, and read them carefully, or you might end up with an adhesive better suited for fussball than your precious tiles.

Userfriendly

Your tile adhesive should be more of a loyal helper, less of a stubborn mule. Pick a product that’s easy to mix and apply without seizing your weekend plans.

Frequently Asked Questions (FAQs)

Why is it important to choose the correct tile adhesive for tiling a wetroom?

Choosing the right tile adhesive for your wet room floors is important. Screw this up; water may sneak beneath the tiles, turning your proud tiling job into a dud. A well-chosen adhesive helps in installing tiles onto both wet room walls and floors in a smooth manner.

What is the impact of poor tiling on wet rooms?

Poor tiling in wet rooms can spoil the entire show faster than mothballs in a wardrobe. Bad tiling can lead to water sneaking in, which is a big no-no in any room, let alone one supposed to hold water. And if your tiles were installed on any floor build without proper planning, be prepared to watch your aesthetics crumble along with your walls and floors. Installing a correctly installed wetroom is every bit as crucial. Don’t fall for style over substance; you need the right materials and textures in there as well. 

Ways to Minimize Tile Cuts and Maintain Waterproofing

Think of your wet room like a jigsaw puzzle. The fewer pieces, the easier the puzzle. Same goes for tiles. Fewer cuts mean fewer chances of exposing areas for water to sneak in. 

The idea is to cover the entire wet room area with tiles as much as possible, while maintaining the waterproof membrane integrity rectifying. You need a fully covered, 100% bed of adhesive, and with flexible rapid-set tile adhesive, you’ve got all bases covered. 

What are the safety tips to observe when applying tile adhesive?

Safety should be your number one priority when it comes to slapping down that tile adhesive.  Whether you’re dealing with ceramic or porcelain, first things first: you must ensure the area you’re working in is well-ventilated. That stuff might look innocent, but the fumes can pack a punch. 

Don’t even think about getting anywhere near that adhesive without a pair of good-quality gloves. And remember to clean up after yourself. 

Final Considerations in Choosing the Best Tile Adhesive for Wet Rooms

Let’s wrap this tiling project. The perfect adhesive for your bathroom tile largely depends on the specifications of your project, the style of the wetroom you envision, and your budget. 

High on your list should be a tile adhesive that effectively mixes portland cement with silica sand. This ain’t your default tile for outdoor applications buddy. It has a slippery consistency, perfect for being applied with a notched trowel and ensures strong bonding.

In the grand scheme of things, considering the style of the wetroom you envisage, whether you’re going 60 and 90 or not, figuring out The porcelain and ceramic tile to suit your taste, effort should be put into the thinset mortar and epoxy or mastic adhesive used as well. 

Your nerves might get the best of you, especially when considering the cost of some tile adhesive. Expensive doesn’t always mean high quality, but cheap could turn out to be expensive too, you dig? You gotta balance the scales: cost, compatibility, and quality. That’s where you draw the line.